Electrical & String Sizing
NEC 690.7 Safety
Extreme Cold Voc Surge & Max String Sizing
Under extreme winter design temperatures (-15°C ambient), open-circuit voltage surges by up to 11.7% due to the negative temperature coefficient of silicon PN junctions. Under a standard 1,000V DC system limit, CSI Solar Co Ltd CSI Solar Co Ltd CS7N-670MB-AG safely permits 19 modules per string compared to 18 modules for the tighter models, reducing overall DC home-run combiner wiring and balance-of-system cost by up to 5.3%.
Quantitative Metrics:
- CSI Solar Co Ltd CS7N-670MB-AG: 51.2V (19 mods/str) [Winner]
- JKM670N-66QL6-BDV-L-AntiDust: 55.5V (18 mods/str)
Engineering Rule: Voc(cold) = Voc_STC + [mu_Voc_mV * (T_cold - 25°C) / 1000]
Thermal Dynamics
Thermal Yield
Midday Hot-Climate Power Retention (65°C Cell)
At peak midday summer operation with a cell junction temperature of 65°C (40°C above standard STC 25°C), thermal degradation causes significant output reduction. Jinko Solar Co Ltd JKM670N-66QL6-BDV-L-AntiDust maintains 89.6% of its nameplate power (-0.26%/°C) versus 84.4% on less thermally resilient modules. In tropical, desert, or hot rooftop climates (>35°C ambient), this thermal gap accounts for a 5.2% net annual kWh yield variance.
Quantitative Metrics:
- CSI Solar Co Ltd CS7N-670MB-AG: 565.5W (84.4% left)
- JKM670N-66QL6-BDV-L-AntiDust: 600.3W (89.6% left) [Winner]
Engineering Rule: P_hot = P_stc * [1 + (mu_Pnom_% * (T_cell - 25°C) / 100)]
Lifetime Degradation
25-Year LCOE
25-Year Lifecycle Output & LID/LeTID Retention
Accounting for Light-Induced Degradation (LID) and Light-and-elevated-Temperature-Induced Degradation (LeTID), Jinko Solar Co Ltd JKM670N-66QL6-BDV-L-AntiDust preserves 89.4% of original rated power at Year 25 (0.4%/yr degradation) compared to 84.8% on conventional models. Over a standard 25-year asset lifecycle for a 10 kW residential array, this creates an incremental generation delta of +10.2 MWh of clean electricity.
Quantitative Metrics:
- CSI Solar Co Ltd CS7N-670MB-AG: 84.8% (Yr25) / 331.3 MWh
- JKM670N-66QL6-BDV-L-AntiDust: 89.4% (Yr25) / 341.5 MWh [Winner]
Engineering Rule: Yield(Yr25) = 100% - [FirstYearDeg% + 24 * AnnualDeg%]
Bifacial Performance
Albedo Harvest
Bifacial Rear-Side Gain over Reflective Substrates
When deployed over reflective substrates (such as light gravel, white TPO commercial membrane roofs, or snow with 35% albedo), rear-side photon absorption provides significant boost. Jinko Solar Co Ltd JKM670N-66QL6-BDV-L-AntiDust yields an effective output of 809.5W (+20.8% gain) thanks to a 85% bifaciality factor, providing higher energy density per installed structure.
Quantitative Metrics:
- CSI Solar Co Ltd CS7N-670MB-AG: 801.3W (+19.6% rear)
- JKM670N-66QL6-BDV-L-AntiDust: 809.5W (+20.8% rear) [Winner]
Engineering Rule: P_effective = P_stc * [1 + (Albedo * BifacialityFactor * ViewFactor)]
Electrical & Cabling
I²R Efficiency
DC String Cable Ohm Heating Loss (40m Run)
Due to Joule heating loss ($P = I^2 R$), operating current (Imp) drastically alters DC cable efficiency over a standard 40m array loop ($4\text{ mm}^2$ / 12 AWG copper). Jinko Solar Co Ltd JKM670N-66QL6-BDV-L-AntiDust operates at 15.61A, dissipating only 85.3W (1.27% of string power), while high-current alternatives with large 210mm wafers dissipate 105W, frequently mandating up-sizing to thicker $6\text{ mm}^2$ or 0\text{ mm}^2$ wiring to prevent thermal throttling.
Quantitative Metrics:
- CSI Solar Co Ltd CS7N-670MB-AG: 105W loss (17.32A Imp)
- JKM670N-66QL6-BDV-L-AntiDust: 85.3W loss (15.61A Imp) [Winner]
Engineering Rule: P_loss = Imp² * (2 * Length * rho / Area)
Safety & Protection
NEC 690.8/9 Code
Maximum Series Fuse & OCPD String Protection
Under NEC 690.8/690.9 overcurrent protection rules, strings require a continuous duty multiplier of .5625 \times I_{sc}$. CSI Solar Co Ltd CSI Solar Co Ltd CS7N-670MB-AG draws a lower short-circuit current of 18.55A, qualifying for standard 30A fuses, while high-current modules push OCPD requirements to 30A. Lower fuse ratings lower combiner enclosure thermal buildup and reduce potential arc flash incident energy.
Quantitative Metrics:
- CSI Solar Co Ltd CS7N-670MB-AG: 30A OCPD (Isc: 18.55A)
- JKM670N-66QL6-BDV-L-AntiDust: 30A OCPD (Isc: 16.34A)
Engineering Rule: Fuse_Rating = Isc * 1.25 (Continuous) * 1.25 (Over-irradiance)
Mechanical & Structural
Structural Load
5,400 Pa Heavy Snow/Wind Surface Deflection Force
Under an international standard 5,400 Pa heavy snow/wind load, the aggregate downward force on CSI Solar Co Ltd CSI Solar Co Ltd CS7N-670MB-AG is 10800 N (1101 kg equivalent) due to its compact 2 m² footprint. Larger oversized utility format panels endure up to 14586 N, creating severe center-span glass deflection, micro-cracking risks, and mandating 6-clamp mounting profiles.
Quantitative Metrics:
- CSI Solar Co Ltd CS7N-670MB-AG: 10800 N (1101 kg load) [Winner]
- JKM670N-66QL6-BDV-L-AntiDust: 14586 N (1487 kg load)
Engineering Rule: TotalForce (N) = TestPressure (5400 Pa) * SurfaceArea (L * W)
Balance of System (BOS)
BOS Cost Optimization
10 kW Array Roof Footprint & Racking BOS Efficiency
To construct a nominal 10 kW DC solar array, CSI Solar Co Ltd CSI Solar Co Ltd CS7N-670MB-AG requires only 15 modules occupying 30 m² of roof space. By contrast, lower efficiency models require up to 15 modules (40.5 m²), directly increasing mounting rail lengths, roof penetration flashings, MLPE optimizers, and installation labor by 0%.
Quantitative Metrics:
- CSI Solar Co Ltd CS7N-670MB-AG: 30 m² (15 panels) [Winner]
- JKM670N-66QL6-BDV-L-AntiDust: 40.5 m² (15 panels)
Engineering Rule: ArrayArea = Ceil(10kW / Pnom) * (Module_L * Module_W)
Safety & Protection
Hot-Spot Immunity
Hot-Spot Thermal Stress & Bypass Diode Partitioning
Under localized partial tree shading or bird droppings, shadowed cells are forced into reverse bias, dissipating power as localized heat. CSI Solar Co Ltd CSI Solar Co Ltd CS7N-670MB-AG incorporates a 66 half-cut cell architecture with 3 Schottky bypass diodes, cutting cell-level current in half and reducing resistive dissipation by 75% during partial shading events to prevent EVA encapsulant browning and thermal cell cleavage.
Quantitative Metrics:
- CSI Solar Co Ltd CS7N-670MB-AG: 66 cells / 3 diodes (Full) [Winner]
- JKM670N-66QL6-BDV-L-AntiDust: 612 cells / 3 diodes (Half-cut)
Engineering Rule: P_dissipated = (I_string / Branches)² * R_internal * ShadedCells
Irradiance & Diffuse Light
Low-Light Yield
Low-Light & Diffuse Irradiance Retention (200 W/m²)
Under overcast skies, dawn, dusk, or diffuse winter light conditions ($200\text{ W/m}^2$), parasitic shunt resistance determines relative efficiency retention. Jinko Solar Co Ltd JKM670N-66QL6-BDV-L-AntiDust maintains 97.5% of its rated conversion efficiency (operating at 24.18% under low irradiance) compared to 93.5% for standard cells. Ideal for northern latitudes with high cloud cover frequencies (e.g. Northern Europe, UK, Pacific Northwest).
Quantitative Metrics:
- CSI Solar Co Ltd CS7N-670MB-AG: 93.5% retention (20.4% eff)
- JKM670N-66QL6-BDV-L-AntiDust: 97.5% retention (24.18% eff) [Winner]
Engineering Rule: Eff_relative(200W) = Eff(STC) * [1 - (V_oc_drop + I_shunt_loss)]
Electrical & MLPE Compatibility
MLPE Pairing
Microinverter & MLPE DC/AC Clipping Compatibility
Pairing modules with module-level power electronics (MLPE, such as Enphase or Hoymiles microinverters) requires balancing DC/AC clipping ratio and MPPT current limits (typically 12.5A~14A). CSI Solar Co Ltd CSI Solar Co Ltd CS7N-670MB-AG pairs with an optimal DC/AC ratio of 2.03 and 17.32A operating current, eliminating thermal clipping bottleneck while maximizing inverter capacity factor.
Quantitative Metrics:
- CSI Solar Co Ltd CS7N-670MB-AG: 2.03x DC/AC (17.32A Imp)
- JKM670N-66QL6-BDV-L-AntiDust: 2.03x DC/AC (15.61A Imp)
Engineering Rule: DC/AC_Ratio = P_nom / P_ac_max; Current_Margin = I_mppt_max - I_mp