Electrical & String Sizing
NEC 690.7 Safety
Extreme Cold Voc Surge & Max String Sizing
Under extreme winter design temperatures (-15°C ambient), open-circuit voltage surges by up to 11.6% due to the negative temperature coefficient of silicon PN junctions. Under a standard 1,000V DC system limit, Topsun Co Ltd Topsun Co Ltd TOP CLASS 660CH12 safely permits 19 modules per string compared to 15 modules for the tighter models, reducing overall DC home-run combiner wiring and balance-of-system cost by up to 21.1%.
Quantitative Metrics:
- ELITE Solar ET-N778TBH660GB: 62.8V (15 mods/str)
- Topsun Co Ltd TOP CLASS 660CH12: 51.2V (19 mods/str) [Winner]
Engineering Rule: Voc(cold) = Voc_STC + [mu_Voc_mV * (T_cold - 25°C) / 1000]
Thermal Dynamics
Thermal Yield
Midday Hot-Climate Power Retention (65°C Cell)
At peak midday summer operation with a cell junction temperature of 65°C (40°C above standard STC 25°C), thermal degradation causes significant output reduction. ELITE Solar ELITE Solar ET-N778TBH660GB maintains 88.1% of its nameplate power (-0.297%/°C) versus 84.6% on less thermally resilient modules. In tropical, desert, or hot rooftop climates (>35°C ambient), this thermal gap accounts for a 3.5% net annual kWh yield variance.
Quantitative Metrics:
- ELITE Solar ET-N778TBH660GB: 581.6W (88.1% left) [Winner]
- Topsun Co Ltd TOP CLASS 660CH12: 558.1W (84.6% left)
Engineering Rule: P_hot = P_stc * [1 + (mu_Pnom_% * (T_cell - 25°C) / 100)]
Lifetime Degradation
25-Year LCOE
25-Year Lifecycle Output & LID/LeTID Retention
Accounting for Light-Induced Degradation (LID) and Light-and-elevated-Temperature-Induced Degradation (LeTID), ELITE Solar ELITE Solar ET-N778TBH660GB preserves 84.8% of original rated power at Year 25 (0.55%/yr degradation) compared to 84.8% on conventional models. Over a standard 25-year asset lifecycle for a 10 kW residential array, this creates an incremental generation delta of +0 MWh of clean electricity.
Quantitative Metrics:
- ELITE Solar ET-N778TBH660GB: 84.8% (Yr25) / 331.3 MWh
- Topsun Co Ltd TOP CLASS 660CH12: 84.8% (Yr25) / 331.3 MWh
Engineering Rule: Yield(Yr25) = 100% - [FirstYearDeg% + 24 * AnnualDeg%]
Bifacial Performance
Albedo Harvest
Bifacial Rear-Side Gain over Reflective Substrates
When deployed over reflective substrates (such as light gravel, white TPO commercial membrane roofs, or snow with 35% albedo), rear-side photon absorption provides significant boost. Topsun Co Ltd Topsun Co Ltd TOP CLASS 660CH12 yields an effective output of 789.4W (+19.6% gain) thanks to a 80% bifaciality factor, providing higher energy density per installed structure.
Quantitative Metrics:
- ELITE Solar ET-N778TBH660GB: 660W (+0% rear)
- Topsun Co Ltd TOP CLASS 660CH12: 789.4W (+19.6% rear) [Winner]
Engineering Rule: P_effective = P_stc * [1 + (Albedo * BifacialityFactor * ViewFactor)]
Electrical & Cabling
I²R Efficiency
DC String Cable Ohm Heating Loss (40m Run)
Due to Joule heating loss ($P = I^2 R$), operating current (Imp) drastically alters DC cable efficiency over a standard 40m array loop ($4\text{ mm}^2$ / 12 AWG copper). ELITE Solar ELITE Solar ET-N778TBH660GB operates at 13.37A, dissipating only 62.6W (0.95% of string power), while high-current alternatives with large 210mm wafers dissipate 105.2W, frequently mandating up-sizing to thicker $6\text{ mm}^2$ or 0\text{ mm}^2$ wiring to prevent thermal throttling.
Quantitative Metrics:
- ELITE Solar ET-N778TBH660GB: 62.6W loss (13.37A Imp) [Winner]
- Topsun Co Ltd TOP CLASS 660CH12: 105.2W loss (17.34A Imp)
Engineering Rule: P_loss = Imp² * (2 * Length * rho / Area)
Safety & Protection
NEC 690.8/9 Code
Maximum Series Fuse & OCPD String Protection
Under NEC 690.8/690.9 overcurrent protection rules, strings require a continuous duty multiplier of .5625 \times I_{sc}$. ELITE Solar ELITE Solar ET-N778TBH660GB draws a lower short-circuit current of 14.03A, qualifying for standard 25A fuses, while high-current modules push OCPD requirements to 30A. Lower fuse ratings lower combiner enclosure thermal buildup and reduce potential arc flash incident energy.
Quantitative Metrics:
- ELITE Solar ET-N778TBH660GB: 25A OCPD (Isc: 14.03A) [Winner]
- Topsun Co Ltd TOP CLASS 660CH12: 30A OCPD (Isc: 18.42A)
Engineering Rule: Fuse_Rating = Isc * 1.25 (Continuous) * 1.25 (Over-irradiance)
Mechanical & Structural
Structural Load
5,400 Pa Heavy Snow/Wind Surface Deflection Force
Under an international standard 5,400 Pa heavy snow/wind load, the aggregate downward force on ELITE Solar ELITE Solar ET-N778TBH660GB is 10800 N (1101 kg equivalent) due to its compact 2 m² footprint. Larger oversized utility format panels endure up to 10800 N, creating severe center-span glass deflection, micro-cracking risks, and mandating 6-clamp mounting profiles.
Quantitative Metrics:
- ELITE Solar ET-N778TBH660GB: 10800 N (1101 kg load)
- Topsun Co Ltd TOP CLASS 660CH12: 10800 N (1101 kg load)
Engineering Rule: TotalForce (N) = TestPressure (5400 Pa) * SurfaceArea (L * W)
Balance of System (BOS)
BOS Cost Optimization
10 kW Array Roof Footprint & Racking BOS Efficiency
To construct a nominal 10 kW DC solar array, ELITE Solar ELITE Solar ET-N778TBH660GB requires only 16 modules occupying 32 m² of roof space. By contrast, lower efficiency models require up to 16 modules (32 m²), directly increasing mounting rail lengths, roof penetration flashings, MLPE optimizers, and installation labor by 0%.
Quantitative Metrics:
- ELITE Solar ET-N778TBH660GB: 32 m² (16 panels)
- Topsun Co Ltd TOP CLASS 660CH12: 32 m² (16 panels)
Engineering Rule: ArrayArea = Ceil(10kW / Pnom) * (Module_L * Module_W)
Safety & Protection
Hot-Spot Immunity
Hot-Spot Thermal Stress & Bypass Diode Partitioning
Under localized partial tree shading or bird droppings, shadowed cells are forced into reverse bias, dissipating power as localized heat. Topsun Co Ltd Topsun Co Ltd TOP CLASS 660CH12 incorporates a 66 half-cut cell architecture with 3 Schottky bypass diodes, cutting cell-level current in half and reducing resistive dissipation by 75% during partial shading events to prevent EVA encapsulant browning and thermal cell cleavage.
Quantitative Metrics:
- ELITE Solar ET-N778TBH660GB: 78 cells / 3 diodes (Full)
- Topsun Co Ltd TOP CLASS 660CH12: 66 cells / 3 diodes (Full) [Winner]
Engineering Rule: P_dissipated = (I_string / Branches)² * R_internal * ShadedCells
Irradiance & Diffuse Light
Low-Light Yield
Low-Light & Diffuse Irradiance Retention (200 W/m²)
Under overcast skies, dawn, dusk, or diffuse winter light conditions ($200\text{ W/m}^2$), parasitic shunt resistance determines relative efficiency retention. ELITE Solar ELITE Solar ET-N778TBH660GB maintains 93.5% of its rated conversion efficiency (operating at 22.04% under low irradiance) compared to 93.5% for standard cells. Ideal for northern latitudes with high cloud cover frequencies (e.g. Northern Europe, UK, Pacific Northwest).
Quantitative Metrics:
- ELITE Solar ET-N778TBH660GB: 93.5% retention (22.04% eff)
- Topsun Co Ltd TOP CLASS 660CH12: 93.5% retention (20.36% eff)
Engineering Rule: Eff_relative(200W) = Eff(STC) * [1 - (V_oc_drop + I_shunt_loss)]
Electrical & MLPE Compatibility
MLPE Pairing
Microinverter & MLPE DC/AC Clipping Compatibility
Pairing modules with module-level power electronics (MLPE, such as Enphase or Hoymiles microinverters) requires balancing DC/AC clipping ratio and MPPT current limits (typically 12.5A~14A). ELITE Solar ELITE Solar ET-N778TBH660GB pairs with an optimal DC/AC ratio of 2 and 13.37A operating current, eliminating thermal clipping bottleneck while maximizing inverter capacity factor.
Quantitative Metrics:
- ELITE Solar ET-N778TBH660GB: 2x DC/AC (13.37A Imp)
- Topsun Co Ltd TOP CLASS 660CH12: 2x DC/AC (17.34A Imp)
Engineering Rule: DC/AC_Ratio = P_nom / P_ac_max; Current_Margin = I_mppt_max - I_mp