Sandia simulation models, California Energy Commission (CEC) test results, and MPPT string sizing specifications.
The INGETEAM POWER TECHNOLOGY SA INGECON SUN 1165TL U B420 {420V} incorporates a precision Maximum Power Point Tracking (MPPT) voltage window of 610V to 740V DC, paired with an absolute maximum DC input voltage of 740V. To prevent inverter shutdown or destructive overvoltage damage during cold winter mornings (-15°C to -30°C), array strings must be strictly designed so that the temperature-corrected open-circuit voltage (Voc_cold) does not breach 740V. Conversely, under hot summer conditions (+65°C cell temperature), string Vmp must remain comfortably above 610V to avoid low-voltage MPPT clipping.
With a rated continuous AC power of 1165.00 kW, this inverter delivers optimal Levelized Cost of Energy (LCOE) when paired with a DC array capacity of 1572.8 kWp (1.30x – 1.35x Inverter Loading Ratio). Oversizing the PV array ensures the inverter operates in its highest efficiency sweet spot during morning and afternoon shoulder hours, while absorbing midday clipping losses that are economically offset by increased total annual kWh production.
Engineered in compliance with UL 1741 SB / IEEE 1547-2018 standards, the unit supports advanced autonomous grid-support functions, including dynamic Volt-VAR reactive voltage regulation, Volt-Watt overvoltage curtailment, and frequency ride-through. Total Harmonic Current Distortion (THD) is maintained strictly below 3%, preventing harmonic noise injection into local utility distribution transformers.