Sandia simulation models, California Energy Commission (CEC) test results, and MPPT string sizing specifications.
The Power Electronics FS1400CU15 {565V} incorporates a precision Maximum Power Point Tracking (MPPT) voltage window of 800V to 1200V DC, paired with an absolute maximum DC input voltage of 1200V. To prevent inverter shutdown or destructive overvoltage damage during cold winter mornings (-15°C to -30°C), array strings must be strictly designed so that the temperature-corrected open-circuit voltage (Voc_cold) does not breach 1200V. Conversely, under hot summer conditions (+65°C cell temperature), string Vmp must remain comfortably above 800V to avoid low-voltage MPPT clipping.
With a rated continuous AC power of 1517.09 kW, this inverter delivers optimal Levelized Cost of Energy (LCOE) when paired with a DC array capacity of 2048.1 kWp (1.30x – 1.35x Inverter Loading Ratio). Oversizing the PV array ensures the inverter operates in its highest efficiency sweet spot during morning and afternoon shoulder hours, while absorbing midday clipping losses that are economically offset by increased total annual kWh production.
Engineered in compliance with UL 1741 SB / IEEE 1547-2018 standards, the unit supports advanced autonomous grid-support functions, including dynamic Volt-VAR reactive voltage regulation, Volt-Watt overvoltage curtailment, and frequency ride-through. Total Harmonic Current Distortion (THD) is maintained strictly below 3%, preventing harmonic noise injection into local utility distribution transformers.